-
201“... sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash...”
Mais informações
Dissertação -
202“... of composition (carbonate or chloride content in the ceria based matrix) and processing (sintering temperature...”
Mais informações
Dissertação -
203“... compacted in a uniaxial press using 700 MPa pressure and sintered in a vacuum oven at 1450⁰C for 1 hour...”
Mais informações
doctoralThesis -
204“...) were sintered at 10000C and 12000C and the specimens prepared in UFRN were sintered at 10000C, 10500C...”
Mais informações
doctoralThesis -
205“...) and thermogravimetry (TGA) were performed to define the parameters for the sintering of the laminate. After sintering...”
Mais informações
doctoralThesis -
206por Santos, Ieda Maria Garcia dos, Silva, J. M., Trindade, M. F. S., Soledade, Luiz Edmundo Bastos, Souza, Antônio Gouveia de, Paskocimas, Carlos Alberto, Silva, Elson Longo da“... and sintered at 950 ºC and 1000 ºC. The results indicate that the addition led to an improvement of sample...”
Mais informações
article -
207“... sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples...”
Mais informações
Dissertação -
208“...: preparation of the mixtures, milling (1h, 24h), compaction uniaxial (200MPa) and vacuum sintering (1400oC/1h...”
Mais informações
doctoralThesis -
209“... (precalcination at 350 ° C / 2h, calcination at 900 ° C / 2h and sintering at 900 / 24h) . The synthesis...”
Mais informações
Dissertação -
210“... and sintered at 1200ºC for 40 min. under environment atmosphere in a resistive oven. The sintered samples were...”
Mais informações
Dissertação -
211“... foams before the final sintering step aiming to increase the open pores at the surface. The results...”
Mais informações
article -
212por Melo, Marcus Antônio de Freitas, Câmara, Ana Paula Costa, Medeiros, L. C. de, Macedo, D. A. de, Melo, Dulce Maria de Araújo“... after sintering between 850 and 1050°C. The technological properties evaluated were: linear shrinkage...”
Mais informações
article -
213por Santos, Rafaela Luiz Pereira, Buciumeanu, Mihaela, Silva, Filipe Samuel, Souza, Júlio César Matias de, Nascimento, Rubens Maribondo do, Motta, Fabiana Villela da, Carvalho, Oscar, Henriques, Bruno“... agglomerates (ZA) and pre-sintered zirconia particles (ZP). The wear tests were carried out using a ball...”
Mais informações
Mais informações
article -
214por Moura, F., Simões, A. Z., Paskocimas, Carlos Alberto, Zaghete, Maria Aparecida, Varela, José A., Silva, Elson Longo da“... value (ɛm ∼ 16,000 at 1 kHz) for the BZT:2V ceramics sintered at 1623 K for 4 h. Remnant polarization...”
Mais informações
article -
215por Paskocimas, Carlos Alberto, Emerenciano, Aline Alencar, Araújo, Allan Jedson Medeiros de, Grilo, João Paulo de Freitas, Macedo, Daniel Araújo de, Rasekh, Shahed, Kovalevsky, Andrei V., Nascimento, Rubens Maribondo do“... of these routes to produce pure Ca3Co4O9 with plate-like morphology. Sintered ceramic samples show randomly...”
Mais informações
article -
216“... varying only the temperature of calcination. Our samples were obtained by Pechini method and sintered...”
Mais informações
Dissertação -
217“... of microwave assisted combustion and after sintering at 800°C in order to obtain the desired phases...”
Mais informações
Dissertação -
218por Costa, A. C. F. M., Diniz, A. P., Viana, Kaline Melo de Souto, Cornejo, D. R., Kiminami, Ruth H.G.A.“...This paper proposes to investigate the sintering at 1200ºC/2h of Ni0.5Zn0.5Fe2-xSmxO4 ferrite doped...”
Mais informações
article -
219por Andrade Júnior, Tarcísio Eloi de, Rambo, Carlos Renato, Sieber, Heino, Martinelli, Antonio Eduardo, Melo, Dulce Maria de Araújo“... was reacted with gaseous Al at 1,400 C–1,600 C in vacuum to form Al4C3. After an oxidation/sintering process...”
Mais informações
article -
220por Nascimento, Rubens Maribondo do, Alves Junior, Rubens, Dutra, Ricardo Peixoto Suassuna, Campos, Lizsandra Fernanda Araújo, Ferreira, H. S., Lima, S. J. G.“... temperature sintering to be used inside the material...”
Mais informações
article -
221por Medeiros, Leonardo Coutinho de., Melo, Marcos Antônio de Freitas., Melo, Dulce Maria de Araújo., Universidade Federal do Rio Grande do Norte.“..., 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered...”
Mais informações
Dissertação -
222por Paskocimas, Carlos Alberto, Araújo, Allan Jedson Menezes de, Alves, Hugo Plinio de Andrade, Andrade, Rivaildo M., Campos, Liszandra Fernanda Araújo, Macedo, Daniel Araújo de, Pinho, André Luís Silva, Nascimento, Rubens Maribondo do“... were dominated by solid-phase and liquid-phase sintering mechanisms, respectively....”
Mais informações
article -
223“... treatment, which will happen the decomposition of organic material and sintering the ceramic material...”
Mais informações
Tese -
224por Cavalcante, Ronaldo Fonseca., Nascimento, Rubens Maribondo do., Martinelli, Antonio Eduardo., Universidade Federal do Rio Grande do Norte.“...) (that facilitates sintering), can be added to the ceramic tile materials with no detrimental effect...”
Mais informações
Dissertação -
225por Albuquerque, F. R., Santos, Ieda Maria Garcia dos, Lima, Severino Jackson Guedes, Santos, Maria Rita de Cássia, Soledade, Luiz Edmundo Bastos, Souza, Antônio Gouveia de, Martinelli, Antonio Eduardo“... specifying the composition region which leads to the highest density after sintering, with a low number...”
Mais informações
article -
226“... and cubic, respectively, where its crys- tallization depends on the temperature’s sintering conditions...”
Mais informações
bachelorThesis -
227por Macedo, Daniel Araújo de, Souza, Graziele L., Cesário, Moises Rômolos, Cela, Beatriz, Martinelli, Antonio Eduardo, Paskocimas, Carlos Alberto, Nascimento, Rubens Maribondo do“... interlayer in the film/substrate interface. The multilayers were sintered at 1150 o C for 6 h and the effect...”
Mais informações
article -
228“...o e 1550 0C, remaining at these temperatures for 2 hour periods. After sintering, the physical...”
Mais informações
Dissertação -
229por Varela, Márcio Luiz, Andrade, Felipe Lira Formiga, Dutra, Ricardo Peixoto Suassuna, Nascimento, Rubens Maribondo do, Paskocimas, Carlos Alberto“... and determination of particle size. Water absorption, apparent porosity, linear firing after sintering, apparent...”
Mais informações
article -
230“... in the ceramic matrix. After sintering at temperatures 1080, 1120 and 1160 °C, the samples were tested for water...”
Mais informações
doctoralThesis -
231“... of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120...”
Mais informações
doctoralThesis -
232“..., 600 and 900° C, and sintered at temperatures of 1200 and 1300º C to win mechanical strength, porosity...”
Mais informações
Dissertação -
233por Melo, Marcus Antônio de Freitas, Medeiros, Rodolfo Luiz Bezerra de Araújo, Figueredo, Gilvan Pereira de, Macedo, Heloísa Pimenta de, Oliveira, Ângelo Anderson Silva de, Rabelo Neto, Raimundo C., Melo, Dulce Maria de Araújo, Braga, Renata Martins“... particle size during the DRM, and indicated the sintering of Ni particles during the first hour...”
Mais informações
article -
234por Luz, Jota Carlos., Paskocimas, Carlos Alberto., Nascimento, Rubens Maribondo do., Universidade Federal do Rio Grande do Norte.“..., mechanical and aesthetic after undergoing appropriate and conventional sintering by microwave energy...”
Mais informações
Tese -
235por Ferreira, Narayanna Marques., Alves Júnior, Clodomiro., Universidade Federal do Rio Grande do Norte.“..., the iron powder with nanoparticles of Ti dispersed distributed, were compacted and sintered at 1120 ° C...”
Mais informações
Dissertação -
236por Anunciação, Elenise Barreto Barbosa., Nascimento, Rubens Maribondo do., Universidade Federal do Rio Grande do Norte.“..., with the application of 25 MPa and sintered at 1100° C, 1150°C, 1200°C, 1225°C and 1250°C, at levels of 20 and 45...”
Mais informações
Tese -
237por Silva, Elialdo Chibério da., Gomes, Uilame Umbelino., Acchar, Wilson., Universidade Federal do Rio Grande do Norte.“... formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150...”
Mais informações
Tese -
238“... and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C...”
Mais informações
Dissertação -
239“... electrolyte choices. However, its poor sinterability is a challenge to be faced to obtain high-performance...”
Mais informações
doctoralThesis -
240por Nascimento, Rubens Maribondo do, Moura, Filipe Samuel, Pereira, Rafael Santiago Floriani, Buciumeanu, Mihaela, Carvalho, Oscar, Bartolomeu, Flávio, Silva, Filipe Samuel“... aging during sterilization, were also assessed. 3Y-TZP disks were divided into four groups: as sintered...”
Mais informações
article