Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça
The purpose of this work was to obtain a calibration curve of a system for cutting tool temperature measurement by the tool-work thermocouple. The system was entirely assembled on a conventional lathe. A cylindrical bar of a quenched and tempered ABNT D6 tool steel was used as workpiece and a full a...
Na minha lista:
Autor principal: | |
---|---|
Outros Autores: | |
Formato: | bachelorThesis |
Idioma: | pt_BR |
Publicado em: |
Universidade Federal do Rio Grande do Norte
|
Assuntos: | |
Endereço do item: | https://repositorio.ufrn.br/handle/123456789/43038 |
Tags: |
Adicionar Tag
Sem tags, seja o primeiro a adicionar uma tag!
|
id |
ri-123456789-43038 |
---|---|
record_format |
dspace |
spelling |
ri-123456789-430382021-10-05T16:01:02Z Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça Calibration of a system for cutting temperature measurement by the tool-work thermocouple method Silva, Ana Carolina Ribeiro da Melo, Anderson Clayton Alves de Barbosa, Cleiton Rubens Formiga Souto, Ulisses Borges Temperatura de corte Método do termopar ferramenta-peça Calibração Engenharia Mecânica The purpose of this work was to obtain a calibration curve of a system for cutting tool temperature measurement by the tool-work thermocouple. The system was entirely assembled on a conventional lathe. A cylindrical bar of a quenched and tempered ABNT D6 tool steel was used as workpiece and a full and uncoated PCBN insert as cutting tool. In order to ensure that the other junctions of the system were kept under room temperature, avoiding undesired voltages, it was built a compensation circuit. Trials were performed from the room temperature to temperature around 400 ºC). The work-tool contact joint was heated with an oxiacetylene flame. During the trials, temperature and voltage signals were collected in order to obtain a representative equation of the system calibration curve which will be used in future work for cutting tool measurement with the work-tool couple used in this investigation. O objetivo deste trabalho foi obter a curva de calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça. O sistema foi todo montado em um torno convencional. Foi utilizado uma peça de aço-ferramenta ABNT D6 temperado e revenido e um inserto de PCBN inteiriço sem revestimento. Para garantir que as outras juntas do sistema fossem mantidas à temperatura ambiente e assim não interferissem na força eletromotriz de interesse, foi montado um circuito de compensação. Os testes de calibração foram realizados a partir da temperatura ambiente até a temperatura aproximadamente 400 ºC. O aquecimento da junta de contato peça-ferramenta foi feito com uma chama de um maçarico oxi-acetilênico. Nos testes foram coletados valores de temperatura e tensão elétrica que, posteriormente, foram relacionados através de uma equação da curva de calibração do sistema que será usada em trabalhos futuros para a medição da temperatura de usinagem com o par ferramenta-peça usado. 2018-12-14T12:20:10Z 2021-10-05T16:01:01Z 2018-12-14T12:20:10Z 2021-10-05T16:01:01Z 2018-12-13 bachelorThesis 20170008573 Silva, Ana Carolina Ribeiro da. Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça. 2018. 39f. Trabalho de Conclusão de Curso (Graduação em Engenharia Mecânica) - Centro de Tecnologia, Curso de Engenharia Mecânica, Universidade Federal do Rio Grande do Norte, Natal, 2018. https://repositorio.ufrn.br/handle/123456789/43038 pt_BR Attribution-NonCommercial-NoDerivs 3.0 Brazil http://creativecommons.org/licenses/by-nc-nd/3.0/br/ application/pdf Universidade Federal do Rio Grande do Norte Brasil UFRN Engenharia Mecânica |
institution |
Repositório Institucional |
collection |
RI - UFRN |
language |
pt_BR |
topic |
Temperatura de corte Método do termopar ferramenta-peça Calibração Engenharia Mecânica |
spellingShingle |
Temperatura de corte Método do termopar ferramenta-peça Calibração Engenharia Mecânica Silva, Ana Carolina Ribeiro da Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça |
description |
The purpose of this work was to obtain a calibration curve of a system for cutting tool temperature measurement by the tool-work thermocouple. The system was entirely assembled on a conventional lathe. A cylindrical bar of a quenched and tempered ABNT D6 tool steel was used as workpiece and a full and uncoated
PCBN insert as cutting tool. In order to ensure that the other junctions of the
system were kept under room temperature, avoiding undesired voltages, it was built a compensation circuit. Trials were performed from the room temperature to temperature around 400 ºC). The work-tool contact joint was heated with an oxiacetylene flame. During the trials, temperature and voltage signals were collected in order to obtain a representative equation of the system calibration curve which will be used in future work for cutting tool measurement with the work-tool couple used in this investigation. |
author2 |
Melo, Anderson Clayton Alves de |
author_facet |
Melo, Anderson Clayton Alves de Silva, Ana Carolina Ribeiro da |
format |
bachelorThesis |
author |
Silva, Ana Carolina Ribeiro da |
author_sort |
Silva, Ana Carolina Ribeiro da |
title |
Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça |
title_short |
Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça |
title_full |
Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça |
title_fullStr |
Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça |
title_full_unstemmed |
Calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça |
title_sort |
calibração de um sistema para medição da temperatura de corte pelo método termopar ferramenta-peça |
publisher |
Universidade Federal do Rio Grande do Norte |
publishDate |
2018 |
url |
https://repositorio.ufrn.br/handle/123456789/43038 |
work_keys_str_mv |
AT silvaanacarolinaribeiroda calibracaodeumsistemaparamedicaodatemperaturadecortepelometodotermoparferramentapeca AT silvaanacarolinaribeiroda calibrationofasystemforcuttingtemperaturemeasurementbythetoolworkthermocouplemethod |
_version_ |
1773959107160571904 |