Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis
The increasing demand for low-power and high-performance electronic systems have been driving the discovery of new materials and the study of their physical and chemical properties. In this sense, the integration of diferent techniques allows us to develop multifunctional materials with specific p...
Na minha lista:
| Autor principal: | |
|---|---|
| Outros Autores: | |
| Formato: | Dissertação |
| Idioma: | pt_BR |
| Publicado em: |
Brasil
|
| Assuntos: | |
| Endereço do item: | https://repositorio.ufrn.br/jspui/handle/123456789/28917 |
| Tags: |
Adicionar Tag
Sem tags, seja o primeiro a adicionar uma tag!
|
| id |
ri-123456789-28917 |
|---|---|
| record_format |
dspace |
| institution |
Repositório Institucional |
| collection |
RI - UFRN |
| language |
pt_BR |
| topic |
Fitas cerâmicas flexíveis Tape casting Filmes finos Magnetron sputtering CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA |
| spellingShingle |
Fitas cerâmicas flexíveis Tape casting Filmes finos Magnetron sputtering CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA Souza, Arthur Lanne Ricardo de Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis |
| description |
The increasing demand for low-power and high-performance electronic systems have
been driving the discovery of new materials and the study of their physical and chemical properties. In this sense, the integration of diferent techniques allows us to develop
multifunctional materials with specific properties and characteristics for certain technological applications. Therefore, this work presents a proposal for the production of hybrid
materials through the integration between the tape casting and magnetron sputtering
techniques. The magnetron sputtering technique was used to deposit trilayered thin films
nanostrutures of Ni81Fe19/Cr/Ni81Fe19, using as substrate Al2O3 and ZrO2 ceramic flexible sheet produced by tape casting technique. As a comparison standard, similar films
were deposited on the amorphous rigid substrate (glass), which has properties well explored in the literature. The suspensions of ceramic materials presented a pseudoplastic
behavior, which is recommended for tape casting technique, and then verified through the
viscosity test. The produced films presents thickness of 300 nm, where varying the thickness of the Ni81Fe19 layers between 75 and 142.5 nm and the Cr layer thickness between
15 and 150 nm. The structural characterization revealed that the change of substrate
used in the films did not alter the structural characteristics of Ni81Fe19. The magnetic
characterization reveals an evolution of the contribution of out-of-plane anisotropy with
the increase of Ni81Fe19 layer thickness, as well the dependence of magnetic properties
with the Ni81Fe19 layer thickness on flexible substrates similar to that observed on films
grown onto glass substrate. Our results show that the flexible sheets retain the characteristics of Ni81Fe19, adding magnetic properties to the Al2O3 and ZrO2 ceramic tapes,
thus making these flexible sheets excellent candidates for moldable device applications as
ceramic-magnetic coating. The increasing demand for low-power and high-performance electronic systems have been driving the discovery of new materials and the study of their physical and chemical properties. In this sense, the integration of diferent techniques allows us to develop
multifunctional materials with specific properties and characteristics for certain technological applications. Therefore, this work presents a proposal for the production of hybrid
materials through the integration between the tape casting and magnetron sputtering
techniques. The magnetron sputtering technique was used to deposit trilayered thin films
nanostrutures of Ni81Fe19/Cr/Ni81Fe19, using as substrate Al2O3 and ZrO2 ceramic flexible sheet produced by tape casting technique. As a comparison standard, similar films were deposited on the amorphous rigid substrate (glass), which has properties well explored in the literature. The suspensions of ceramic materials presented a pseudoplastic
behavior, which is recommended for tape casting technique, and then verified through the
viscosity test. The produced films presents thickness of 300 nm, where varying the thickness of the Ni81Fe19 layers between 75 and 142.5 nm and the Cr layer thickness between
15 and 150 nm. The structural characterization revealed that the change of substrate
used in the films did not alter the structural characteristics of Ni81Fe19. The magnetic
characterization reveals an evolution of the contribution of out-of-plane anisotropy with
the increase of Ni81Fe19 layer thickness, as well the dependence of magnetic properties
with the Ni81Fe19 layer thickness on flexible substrates similar to that observed on films
grown onto glass substrate.Our results show that the flexible sheets retain the characteristics of Ni81Fe19, adding magnetic properties to the Al2O3 and ZrO2 ceramic tapes,
thus making these flexible sheets excellent candidates for moldable device applications as
ceramic-magnetic coating. |
| author2 |
Correa, Márcio Assolin |
| author_facet |
Correa, Márcio Assolin Souza, Arthur Lanne Ricardo de |
| format |
masterThesis |
| author |
Souza, Arthur Lanne Ricardo de |
| author_sort |
Souza, Arthur Lanne Ricardo de |
| title |
Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis |
| title_short |
Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis |
| title_full |
Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis |
| title_fullStr |
Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis |
| title_full_unstemmed |
Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis |
| title_sort |
integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis |
| publisher |
Brasil |
| publishDate |
2020 |
| url |
https://repositorio.ufrn.br/jspui/handle/123456789/28917 |
| work_keys_str_mv |
AT souzaarthurlannericardode integracaodastecnicastapecastingemagnetronsputteringparaodesenvolvimentodesistemasmultifuncionaismoldaveis AT souzaarthurlannericardode integrationofthetapecastingandmagnetronsputteringtechniquesforthedevelopmentofmoldablemultifunctionalsystems |
| _version_ |
1773967263165054976 |
| spelling |
ri-123456789-289172020-05-10T07:30:44Z Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis Integration of the tape casting and magnetron sputtering techniques for the development of moldable multifunctional systems Souza, Arthur Lanne Ricardo de Correa, Márcio Assolin Costa, Antonio Carlos Silva da Carvalho, Bruno Ricardo de Fitas cerâmicas flexíveis Tape casting Filmes finos Magnetron sputtering CNPQ::CIENCIAS EXATAS E DA TERRA::FISICA The increasing demand for low-power and high-performance electronic systems have been driving the discovery of new materials and the study of their physical and chemical properties. In this sense, the integration of diferent techniques allows us to develop multifunctional materials with specific properties and characteristics for certain technological applications. Therefore, this work presents a proposal for the production of hybrid materials through the integration between the tape casting and magnetron sputtering techniques. The magnetron sputtering technique was used to deposit trilayered thin films nanostrutures of Ni81Fe19/Cr/Ni81Fe19, using as substrate Al2O3 and ZrO2 ceramic flexible sheet produced by tape casting technique. As a comparison standard, similar films were deposited on the amorphous rigid substrate (glass), which has properties well explored in the literature. The suspensions of ceramic materials presented a pseudoplastic behavior, which is recommended for tape casting technique, and then verified through the viscosity test. The produced films presents thickness of 300 nm, where varying the thickness of the Ni81Fe19 layers between 75 and 142.5 nm and the Cr layer thickness between 15 and 150 nm. The structural characterization revealed that the change of substrate used in the films did not alter the structural characteristics of Ni81Fe19. The magnetic characterization reveals an evolution of the contribution of out-of-plane anisotropy with the increase of Ni81Fe19 layer thickness, as well the dependence of magnetic properties with the Ni81Fe19 layer thickness on flexible substrates similar to that observed on films grown onto glass substrate. Our results show that the flexible sheets retain the characteristics of Ni81Fe19, adding magnetic properties to the Al2O3 and ZrO2 ceramic tapes, thus making these flexible sheets excellent candidates for moldable device applications as ceramic-magnetic coating. The increasing demand for low-power and high-performance electronic systems have been driving the discovery of new materials and the study of their physical and chemical properties. In this sense, the integration of diferent techniques allows us to develop multifunctional materials with specific properties and characteristics for certain technological applications. Therefore, this work presents a proposal for the production of hybrid materials through the integration between the tape casting and magnetron sputtering techniques. The magnetron sputtering technique was used to deposit trilayered thin films nanostrutures of Ni81Fe19/Cr/Ni81Fe19, using as substrate Al2O3 and ZrO2 ceramic flexible sheet produced by tape casting technique. As a comparison standard, similar films were deposited on the amorphous rigid substrate (glass), which has properties well explored in the literature. The suspensions of ceramic materials presented a pseudoplastic behavior, which is recommended for tape casting technique, and then verified through the viscosity test. The produced films presents thickness of 300 nm, where varying the thickness of the Ni81Fe19 layers between 75 and 142.5 nm and the Cr layer thickness between 15 and 150 nm. The structural characterization revealed that the change of substrate used in the films did not alter the structural characteristics of Ni81Fe19. The magnetic characterization reveals an evolution of the contribution of out-of-plane anisotropy with the increase of Ni81Fe19 layer thickness, as well the dependence of magnetic properties with the Ni81Fe19 layer thickness on flexible substrates similar to that observed on films grown onto glass substrate.Our results show that the flexible sheets retain the characteristics of Ni81Fe19, adding magnetic properties to the Al2O3 and ZrO2 ceramic tapes, thus making these flexible sheets excellent candidates for moldable device applications as ceramic-magnetic coating. Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES A demanda crescente por sistemas eletrônicos de alto desempenho e baixo consumo de energia vêm impulsionando a descoberta de novos materiais e o estudo de suas propriedades físicas e químicas. Neste sentido, a integração de diferentes técnicas nos permite o desenvolvimento de materiais multifuncionais com propriedades e características específicas para determinadas aplicações tecnológicas. Neste cenário, esse trabalho apresenta uma proposta para produção de materiais híbridos por meio da integração entre as técnicas tape casting e magnetron sputtering. Para esta finalidade, o magnetron sputtering foi utilizado para depositar nanoestruturas na forma de filmes finos tricamadas Ni81Fe19/Cr/Ni81Fe19, utilizando como substrato fitas cerâmicas flexíveis de Al2O3 e ZrO2, produzidas via tape casting. Como padrão de comparação foram utilizados filmes semelhantes depositados sobre substrato rígido amorfo (vidro), que possuem propriedades bem exploradas na literatura. As lamas, suspensões dos materiais cerâmicos, apresentaram o comportamento pseudoplástico, que é o recomendado para o tape casting, constatado pelo ensaio de viscosidade. Os filmes foram produzidos com espessura total fixa em 300 nm, porém variando a espessura das camadas de Ni81Fe19 entre 75 e 142.5 nm e a espessura da camada de Cr entre 15 e 150 nm. A caracterização estrutural revelou que a mudança de substrato utilizado nos filmes não alterou as características estruturais do Ni81Fe19. A caracterização magnética revelou que os filmes sobre as fitas flexíveis apresentam a evolução da contribuição da anisotropia fora do plano com o crescimento da espessura das camadas Ni81Fe19, assim como a dependência das propriedades magnéticas com a espessura da camada de Ni81Fe19, resultados que refletem as propriedades magnéticas encontradas em filmes finos de Ni81Fe19 sobre vidro na literatura. Como base nestes resultados, identificamos que na deposição de filmes finos Ni81Fe19/Cr/Ni81Fe19, as fitas flexíveis conservam as características do Ni81Fe19, agregando propriedades magnéticas as fitas cerâmicas de Al2O3 e ZrO2, tornando assim estas fitas flexíveis excelentes candidatas para aplicações em dispositivos moldáveis como revestimento cerâmico-magnético 2020-05-05T22:37:25Z 2020-05-05T22:37:25Z 2019-12-17 masterThesis SOUZA, Arthur Lanne Ricardo de. Integração das técnicas tape casting e magnetron sputtering para o desenvolvimento de sistemas multifuncionais moldáveis. 2019. 87f. Dissertação (Mestrado em Física) - Centro de Ciências Exatas e da Terra, Universidade Federal do Rio Grande do Norte, Natal, 2019. https://repositorio.ufrn.br/jspui/handle/123456789/28917 pt_BR Acesso Aberto application/pdf Brasil UFRN PROGRAMA DE PÓS-GRADUAÇÃO EM FÍSICA |