Estratégias de tratamentos e aplicações para a água produzida utilizando um efluente sintético
The produced water is one of the main effluents of the petroleum industry and is characterized as an effluent of complex composition, formed by various organic and inorganic compounds. It accounts for about 70% of total wastewater generated during the life of the well and their characteristics an...
Na minha lista:
主要作者: | |
---|---|
其他作者: | |
格式: | doctoralThesis |
語言: | por |
出版: |
Brasil
|
主題: | |
在線閱讀: | https://repositorio.ufrn.br/jspui/handle/123456789/26211 |
標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
總結: | The produced water is one of the main effluents of the petroleum industry and is
characterized as an effluent of complex composition, formed by various organic and inorganic
compounds. It accounts for about 70% of total wastewater generated during the life of the well
and their characteristics and quantities produced are also dependent on their location and age
of this one. Currently, in Brazil, millions of m³ of water effluents are disposed of in the
environment, as well as a considerable amount of oils and greases. The present thesis aimed to
investigate, through a synthesized effluent, potential applicabilities for untreated and treated
produced water and, thus, enable the management and reuse of this effluent. Synthetic produced
water was used as an additional carbon source when using coconut, cashew, carnauba and
sugarcane residues, as well as moringa seeds, to synthesize rhamnolipids from Pseudomonas
aeruginosa at 200 rpm, 38 ° C and 72 h. The produced water was submitted to a physicalchemical
treatment, whose combined process was formed by a flocculation step, with 226 rpm
and 3 minutes in the fast mixing stage and 90 rpm and 4 minutes in the slow mixing stage,
followed by dissolved air flotation (DAF), carried out under the injection of 10% v/v of water
saturated with air at 6 bar and with a flotation time of 28 minute, using a concentration of 64
mg/L of natural flocculant. A biological treatment was also used to evaluate the removal
efficiency of the oil and grease content of the produced water, operating at 6 h in a continuous
and aerobic system, with a hydraulic retention time of 2.27 days. The results showed that
produced water without previous treatment was presented with a potential use for
supplementation of carbon source to agroindustrial residues in the production of biosurfactant.
promoting a positive emulsion stability effect when using the green coconut shells as the
substrate and maintaining stable, under elevated temperatures, the emulsion formed by the broth
produced by cashew residues. When undergoing a physical-chemical treatment through
flocculation/DAF, demonstrated that extracts of Moringa oleifera seeds with and without oil
are effective natural flocculants in their treatment, reducing the content of oils and greases
(TOG) in about 82%, with the oil extraction unaffecting the coagulant effect of the seeds. The
biological treatment through activated sludge was highly efficient in the removal of TOG from
produced water, with efficiencies, in most cases, greater than 90% and achieving compliance with the environmental requirements for this parameter. Through the results obtained it was
possible to conclude that the effluent treated by this biological process presents a promising
ability to be reused in the germination and irrigation of non-food crops. These results
demonstrated to be promising for the reuse of produced water as resources for higher value
demands production, minimizing the impact of this effluent on the environment. |
---|