Caracterização de amostras de petróleo e modelagem termodinâmica
The aim of this work was to analyze the thermodynamic properties of petroleum samples in order to develop a computational methodology to determine the composition and critical properties of the pseudo-components present in the fractions of the analyzed samples. of gas condensate (CG) and light petro...
Guardat en:
Autor principal: | |
---|---|
Altres autors: | |
Format: | Dissertação |
Idioma: | por |
Publicat: |
Brasil
|
Matèries: | |
Accés en línia: | https://repositorio.ufrn.br/jspui/handle/123456789/23397 |
Etiquetes: |
Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
|
id |
ri-123456789-23397 |
---|---|
record_format |
dspace |
institution |
Repositório Institucional |
collection |
RI - UFRN |
language |
por |
topic |
Caracterização Pseudo-componentes Equação de Estado Célula de equilíbrio Pressão de bolha CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
spellingShingle |
Caracterização Pseudo-componentes Equação de Estado Célula de equilíbrio Pressão de bolha CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA Barbalho, Thales Cainã dos Santos Caracterização de amostras de petróleo e modelagem termodinâmica |
description |
The aim of this work was to analyze the thermodynamic properties of petroleum samples in order to develop a computational methodology to determine the composition and critical properties of the pseudo-components present in the fractions of the analyzed samples. of gas condensate (CG) and light petroleum fraction (FPL). The density was measured using pycnometry. For this purpose, a thermostatic heating mantle and a thermometer were used to monitor the temperature. The distilled fractions were collected after passing through a condenser (20 °C), the boiling temperature and density being also recorded by pycnometry. Thus, it was possible to calculate the molecular mass using the Riazi-Daubert correlation as well as the temperature and critical pressure using the Lee-Kesler correlations and the acentric factor from the Edmister correlation of each pseudo-component. For the validation of the characterization, bubble pressure experiments were performed with the sample in an equilibrium cell in which it is possible to apply the visual method and the expansion chamber, under specific conditions of molar concentration (20 – 60 % of sample) and temperature (30 - 120 °C). The results obtained were compared with those simulated by SPECS v5.63 software. For the systems involving CO2-CG, the calculated errors averaged were 4,5, 4,8 and 3,7 %, respectively for SRK, PR and ALS equations, while for CO2- FPL values were, on average, 7,5, 4,6 and 2,6 %, respectively, for the same state equations. It can be concluded that the present work had the objectives reached and that the methodology used had a satisfactory performance to describe the studied sample, being able to be applied to different petroleum samples for characterization purposes |
author2 |
Chiavone Filho, Osvaldo |
author_facet |
Chiavone Filho, Osvaldo Barbalho, Thales Cainã dos Santos |
format |
masterThesis |
author |
Barbalho, Thales Cainã dos Santos |
author_sort |
Barbalho, Thales Cainã dos Santos |
title |
Caracterização de amostras de petróleo e modelagem termodinâmica |
title_short |
Caracterização de amostras de petróleo e modelagem termodinâmica |
title_full |
Caracterização de amostras de petróleo e modelagem termodinâmica |
title_fullStr |
Caracterização de amostras de petróleo e modelagem termodinâmica |
title_full_unstemmed |
Caracterização de amostras de petróleo e modelagem termodinâmica |
title_sort |
caracterização de amostras de petróleo e modelagem termodinâmica |
publisher |
Brasil |
publishDate |
2017 |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/23397 |
work_keys_str_mv |
AT barbalhothalescainadossantos caracterizacaodeamostrasdepetroleoemodelagemtermodinamica AT barbalhothalescainadossantos characterizationofpetroleumsamplesandthermodynamicmodeling |
_version_ |
1773962902834774016 |
spelling |
ri-123456789-233972017-11-04T23:28:37Z Caracterização de amostras de petróleo e modelagem termodinâmica Characterization of petroleum samples and thermodynamic modeling Barbalho, Thales Cainã dos Santos Chiavone Filho, Osvaldo http://lattes.cnpq.br/2006799949382442 http://lattes.cnpq.br/2621516646153655 Oliveira, Humberto Neves Maia de http://lattes.cnpq.br/7302633941782540 Araújo, Alessandro Alisson de Lemos http://lattes.cnpq.br/6204950349091367 Foletto, Edson Luiz http://lattes.cnpq.br/6550340290019699 Caracterização Pseudo-componentes Equação de Estado Célula de equilíbrio Pressão de bolha CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA The aim of this work was to analyze the thermodynamic properties of petroleum samples in order to develop a computational methodology to determine the composition and critical properties of the pseudo-components present in the fractions of the analyzed samples. of gas condensate (CG) and light petroleum fraction (FPL). The density was measured using pycnometry. For this purpose, a thermostatic heating mantle and a thermometer were used to monitor the temperature. The distilled fractions were collected after passing through a condenser (20 °C), the boiling temperature and density being also recorded by pycnometry. Thus, it was possible to calculate the molecular mass using the Riazi-Daubert correlation as well as the temperature and critical pressure using the Lee-Kesler correlations and the acentric factor from the Edmister correlation of each pseudo-component. For the validation of the characterization, bubble pressure experiments were performed with the sample in an equilibrium cell in which it is possible to apply the visual method and the expansion chamber, under specific conditions of molar concentration (20 – 60 % of sample) and temperature (30 - 120 °C). The results obtained were compared with those simulated by SPECS v5.63 software. For the systems involving CO2-CG, the calculated errors averaged were 4,5, 4,8 and 3,7 %, respectively for SRK, PR and ALS equations, while for CO2- FPL values were, on average, 7,5, 4,6 and 2,6 %, respectively, for the same state equations. It can be concluded that the present work had the objectives reached and that the methodology used had a satisfactory performance to describe the studied sample, being able to be applied to different petroleum samples for characterization purposes Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) O presente trabalho teve como objetivo fazer a caracterização analítica de propriedades termodinâmicas de amostras de petróleo, afim de se desenvolver uma metodologia computacional com o intuito de determinar a composição e as propriedades críticas dos pseudo-componentes presentes nas frações das amostras analisadas, que foram denominadas de condensado de gás (CG) e fração de petróleo leve (FPL). A massa específica foi mensurada utilizando picnometria. Para tanto foi utilizado uma manta termostática para o aquecimento e um termômetro para o acompanhamento da temperatura. As frações destiladas foram recolhidas após passarem por um condensador (20 °C), sendo registrado a temperatura de ebulição e a massa específica também por picnometria. Com isso, foi possível calcular a massa molecular utilizando a correlação de Riazi-Daubert, bem como a temperatura e a pressão crítica usando as correlações de Lee-Kesler e o fator acêntrico a partir da correlação de Edmister, de cada pseudo-componente. Para a validação da caracterização, foram realizados experimentos de pressão de bolha com a amostra em uma célula de equilíbrio na qual é possível aplicar o método visual e da câmara de expansão, em condições específicas de concentração molar (20 – 60 % de amostra) e temperatura (30 – 120 °C). Os resultados obtidos foram comparados com os simulados pelo software SPECS v5.63. Para os sistemas envolvendo CO2-CG os erros calculados foram, em média, de 4,5, 4,8 e 3,7 %, respectivamente para as equações de estado SRK, PR e ALS, enquanto que para os sistemas CO2-FPL esses valores foram, em média, de 7,5, 4,6 e 2,6 %, respectivamente para as mesmas equações de estado. Podemos concluir, que os objetivos atingidos foram alcançados e a metodologia empregada teve um desempenho satisfatório para descrever a amostra estudada, podendo ser aplicada a diferentes amostras de petróleo para fins de caracterização 2017-06-06T21:05:02Z 2017-06-06T21:05:02Z 2017-02-17 masterThesis BARBALHO, Thales Cainã dos Santos. Caracterização de amostras de petróleo e modelagem termodinâmica. 2017. 70f. Dissertação (Mestrado em Engenharia Química) - Centro de Tecnologia, Universidade Federal do Rio Grande do Norte, Natal, 2017. https://repositorio.ufrn.br/jspui/handle/123456789/23397 por Acesso Aberto application/pdf Brasil UFRN PROGRAMA DE PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA |