Síntese e caracterização do Molibdato de Estrôncio obtido a partir do método de complexação combinado EDTA/Citrato para degradação fotocatalítica de corante da indústria têxtil
This work describes the 2³ experimental design with center point in triplicate for the production of strontium molybdate (SrMoO4) through complexation combined Citrate/EDTA method where investigated the influence of pH (6, 7,5 and 9), time calcination (3, 4 and 5 h) and heating rate (5, 7 and 10°C m...
Na minha lista:
| Autor principal: | |
|---|---|
| Outros Autores: | |
| Formato: | Dissertação |
| Idioma: | por |
| Publicado em: |
Brasil
|
| Assuntos: | |
| Endereço do item: | https://repositorio.ufrn.br/jspui/handle/123456789/21877 |
| Tags: |
Adicionar Tag
Sem tags, seja o primeiro a adicionar uma tag!
|
| Resumo: | This work describes the 2³ experimental design with center point in triplicate for the production of strontium molybdate (SrMoO4) through complexation combined Citrate/EDTA method where investigated the influence of pH (6, 7,5 and 9), time calcination (3, 4 and 5 h) and heating rate (5, 7 and 10°C min-1) in some of its chemical and physical parameters. Based on thermogravimetric curve of SrMoO4 powders were calcined at 650°C. The synthesized materials were characterized by TG/DSC, XRD, EDX, SEM and ERD. The lattice parameters of the crystal structure were obtained from the Rietveld refinement method. All the XRD patterns were indexed according to JCPDS 01-085-0586 record with tetragonal structure and space group I41/a and the residual parameter structure refinement ranged from 1.035 to 1.292, secondary phases and impurities not being identified. It was found that there are differences between the average relative intensities of the diffraction peaks of X-rays. Using statistical tools, it was found that the rate of heating was the independent variable showed the greatest influence on this difference. The EDX analysis showed the presence of deviations between the theoretical and experimental composition for strontium and molybdenum components; the percentage deviation ranged from 0.027 to 3.67% depending on the conditions of synthesis. According to the SEM micrographs, the synthesized powders are composed of agglomerates of particles with irregular and spherical morphology bipiramidal. According to the analysis of the experimental design, with the dependent variable bandgap energy, the lowest values (4.18 and 4.17 eV to pH 6 and 9, respectively) were the samples calcined for 3 hours at the same heating rate 10 C min-1 compared to the calcined material in other conditions of synthesis and the statistical models generated have been shown to describe the observed phenomena. Exploratory testing photodegradation of the synthetic solution of methylene blue dye using the material bandgap of 4.17 eV indicate that the tested powder has influence on the reduction of dye concentration for tests carried out in pH 2 and 5 getting approximately 95% and 24 % conversion respectively, and the test at pH 9 it was noted that direct photolysis is more effective in reducing the dye concentration reached around 67% conversion, but the reaction process needs more study to better understand the results. |
|---|