Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados

During the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in...

Cur síos iomlán

Sábháilte in:
Sonraí bibleagrafaíochta
Príomhchruthaitheoir: Sousa, Paula Luciana Rodrigues de
Rannpháirtithe: Santos, Everaldo Silvino dos
Formáid: Dissertação
Teanga:por
Foilsithe / Cruthaithe: Universidade Federal do Rio Grande do Norte
Ábhair:
Rochtain ar líne:https://repositorio.ufrn.br/jspui/handle/123456789/20027
Clibeanna: Cuir clib leis
Níl clibeanna ann, Bí ar an gcéad duine le clib a chur leis an taifead seo!
id ri-123456789-20027
record_format dspace
institution Repositório Institucional
collection RI - UFRN
language por
topic Dibenzotiofeno
2-Hidroxibifenil
Lodos ativados
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
spellingShingle Dibenzotiofeno
2-Hidroxibifenil
Lodos ativados
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
Sousa, Paula Luciana Rodrigues de
Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
description During the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in refinery water a synthetic wastewater was prepared to be treated using activated sludge. For this, a 2 3 Composite Design (plus 3 central points and six axial points) was carried out. The planning had as independent variables (factors) the initial concentration of DBT, pH and time of biodegradation. Biodegradation of DBT was assayed following the parameters COD, pH, temperature, SS, VSS, FVS, SVI. Concerned to the chromatographic conditions, a methodology was validated in order to verify the presence of DBT and its metabolite, 2-HBF, in the final wastewater treated by activated sludge system using a liquid - liquid extraction coupled to HPLC / UV analysis. The parameters used for validation were DL, QL, linearity, recovery and repeatability. As for optimization, the results indicated that the studied methodology can be used in monitoring the DBT degradation and 2- HBF by activated sludge, as they showed excellent linearity values, coefficients of variation, so as satisfactory recovery percentage. COD reduction efficiency tests showed an average percentage of 64.4%. The increasing trend for the results for the TSS and VSS tests showed that the activated sludge was well tailored. The best operating conditions for the reduction of COD were observed when operated with median concentrations of DBT, a higher time to biodegradation, and pH in both the acidic range as the basic one. The biodegradability of the DBT was confirmed by determining the presence of HBF-2. The highest concentrations of HBF-2 were obtained in extreme concentrations of DBT and pH, and higher biodegradation times.
author2 Santos, Everaldo Silvino dos
author_facet Santos, Everaldo Silvino dos
Sousa, Paula Luciana Rodrigues de
format masterThesis
author Sousa, Paula Luciana Rodrigues de
author_sort Sousa, Paula Luciana Rodrigues de
title Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_short Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_full Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_fullStr Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_full_unstemmed Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
title_sort avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados
publisher Universidade Federal do Rio Grande do Norte
publishDate 2016
url https://repositorio.ufrn.br/jspui/handle/123456789/20027
work_keys_str_mv AT sousapaulalucianarodriguesde avaliacaodabiodegradacaododibenzotiofenoutilizandolodosativados
AT sousapaulalucianarodriguesde dibenzothiophenebiodegradationevaluationusingactivatedsludge
_version_ 1773965620984938496
spelling ri-123456789-200272017-11-02T17:51:18Z Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados Dibenzothiophene biodegradation evaluation using activated sludge Sousa, Paula Luciana Rodrigues de Santos, Everaldo Silvino dos http://lattes.cnpq.br/0332768225098733 http://lattes.cnpq.br/4330639792072559 Macedo, Gorete Ribeiro de http://lattes.cnpq.br/3324083094904117 Paulo, João Bosco de Araújo http://lattes.cnpq.br/4322467752580322 Araújo, Sarah de Abreu Moreira Dibenzotiofeno 2-Hidroxibifenil Lodos ativados CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA During the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in refinery water a synthetic wastewater was prepared to be treated using activated sludge. For this, a 2 3 Composite Design (plus 3 central points and six axial points) was carried out. The planning had as independent variables (factors) the initial concentration of DBT, pH and time of biodegradation. Biodegradation of DBT was assayed following the parameters COD, pH, temperature, SS, VSS, FVS, SVI. Concerned to the chromatographic conditions, a methodology was validated in order to verify the presence of DBT and its metabolite, 2-HBF, in the final wastewater treated by activated sludge system using a liquid - liquid extraction coupled to HPLC / UV analysis. The parameters used for validation were DL, QL, linearity, recovery and repeatability. As for optimization, the results indicated that the studied methodology can be used in monitoring the DBT degradation and 2- HBF by activated sludge, as they showed excellent linearity values, coefficients of variation, so as satisfactory recovery percentage. COD reduction efficiency tests showed an average percentage of 64.4%. The increasing trend for the results for the TSS and VSS tests showed that the activated sludge was well tailored. The best operating conditions for the reduction of COD were observed when operated with median concentrations of DBT, a higher time to biodegradation, and pH in both the acidic range as the basic one. The biodegradability of the DBT was confirmed by determining the presence of HBF-2. The highest concentrations of HBF-2 were obtained in extreme concentrations of DBT and pH, and higher biodegradation times. Durante o processo de refino do petróleo tem-se como descarte um grande volume de água, a qual carrega os contaminantes provenientes do processo. Uma classe de compostos contaminantes, decorrente da indústria petroquímica, são os hidrocarbonetos poliaromáticos (HPA’s). Visando avaliar a biodegradação do Dibenzotiofeno presente na água de refinaria preparou-se um efluente sintético para ser tratado utilizando lodos ativados. Para isso, realizou-se um planejamento composto central 2³ com triplicata no ponto central e 6 pontos axiais tendo como variáveis independentes (fatores) a concentração inicial de DBT, o pH e o tempo de biodegradação. A presença do DBT, e de seu derivado 2-HBF, no efluente final tratado pelo sistema de lodos ativados foi monitorada efetuando-se uma extração líquido - líquido com posterior análise em CLAE/UV utilizando-se uma metodologia otimizada no presente estudo. A biodegradação do DBT foi verificada monitorando-se os parâmetros DQO, pH, temperatura, SST, SSV, VFL, IVL. Quanto à adequação das análises cromatográficas, os resultados indicaram que a metodologia avaliada pode ser utilizada no acompanhamento da degradação de DBT e 2-HBF por lodos ativados, visto que foram obtidos ótimos valores de linearidade, coeficientes de variação, assim também como percentuais de recuperação bastante satisfatórios. Para os testes de eficiência de redução da DQO foi obtido um percentual médio de 64,4 %. Os comportamentos crescentes dos resultados para os testes de SST e SSV mostraram que os lodos ativados foram bem adaptados. As melhores condições operacionais para redução de DQO foram verificadas quando operados com concentrações medianas de DBT, maiores tempo para biodegradação, e pH tanto na faixa ácida quanto na básica. A biodegradação do DBT foi confirmada avaliando-se a presença do 2-HBF. As maiores concentrações de 2-HBF foram obtidas nos extremos das concentrações de DBT e de pH, e em maiores tempos de biodegradação. 2016-03-12T00:09:54Z 2016-03-12T00:09:54Z 2015-02-02 masterThesis SOUSA, Paula Luciana Rodrigues de. Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados. 2015. 64f. Dissertação (Mestrado em Engenharia Química) - Centro de Tecnologia, Universidade Federal do Rio Grande do Norte, Natal, 2015. https://repositorio.ufrn.br/jspui/handle/123456789/20027 por Acesso Aberto application/pdf Universidade Federal do Rio Grande do Norte Brasil UFRN PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA