Estudo de um isolante térmico para tubos fabricado em material compósito
It presents a new type of insulation for ductwork hot water, which can be used in solar systems for heating water, which consists of a composite of different compositions based on plaster, cement and EPS ground, palm and water. This composite has as its main features easy assembly and manufacturing...
Na minha lista:
Autor principal: | |
---|---|
Outros Autores: | |
Formato: | Dissertação |
Idioma: | por |
Publicado em: |
Universidade Federal do Rio Grande do Norte
|
Assuntos: | |
Acesso em linha: | https://repositorio.ufrn.br/jspui/handle/123456789/15685 |
Tags: |
Adicionar Tag
Sem tags, seja o primeiro a adicionar uma tag!
|
Resumo: | It presents a new type of insulation for ductwork hot water, which can be used in solar
systems for heating water, which consists of a composite of different compositions
based on plaster, cement and EPS ground, palm and water. This composite has as its
main features easy assembly and manufacturing processes and low cost. Comparative
results will be presented on the tests of materials and thermal tubes proposed. Four
formulations were used to manufacture tubes with three diameters 70, 65 and 42mm. It
was also tested conventionally used for elastomeric foam insulation to 110 ° C, for a
comparative analysis with the composite pipe insulator proposed. It will demonstrate
that the cost of manufacturing of such tubes is competitive with alternative elastomeric
foam tested, but results of the composite tube to the temperature range studied, are
lower. Another drawback of the composite insulator tube is its large mass. It would be
important to test such a composite for greater levels of temperature to a diagnostic
technique competitive with conventionally used insulators. A positive factor of using
the proposed composite-tube would be the recycling of EPS so damaging to the
environment, representing an environmentally friendly application of science |
---|